Complete Valve Solutions for Pump Systems
A pumping system requires more than only a pump. Correct valve selection helps control flow, isolate equipment for maintenance and reduce problems caused by reverse flow. A check valve or NRV allows flow in one direction and prevents reverse flow, making it especially important in pump discharge piping. TARIS supports valve requirements for: Dewatering Pumps • Water Transfer Systems • Booster Pumps • Sewage Pumps • Wastewater Systems • Irrigation • Construction • Industrial Piping • Municipal Networks • Building Services
Maintain Pump Prime on Suction Lines
Foot Valves
A foot valve is a non-return valve commonly installed at the end of a pump suction line.
It helps prevent water from draining backward when the pump stops, helping maintain prime for the next startup.
For pumps operating under suction-lift conditions, pump manufacturers commonly recommend a suitable non-return valve or foot valve in the suction piping.
Foot valves are frequently supplied with a strainer to help reduce the entry of larger debris.
Applications:
Dewatering Pumps • Irrigation Pumps • Surface Pumps • Water Transfer Pumps • Agriculture • Temporary Pumping
Valves for Sewage & Wastewater Systems
Wastewater installations often require valves capable of handling dirty water, suspended solids and demanding operating conditions.
Suitable valve selections may include:
Ball Check Valve – sewage and wastewater applications
Swing Check Valve – pump discharge lines
Knife Gate Valve – slurry and solids isolation
Gate Valve – pipeline isolation
Butterfly Valve – larger pipelines
Air Valve – rising mains and wastewater networks
The correct selection depends on the type and concentration of solids, operating pressure and system configuration.
Reliable On/Off Isolation
Gate Valves
Gate valves are mainly designed for fully open or fully closed operation.
They are widely used to isolate equipment or sections of pipelines.
Typical applications include:
Water Supply • Pump Rooms • Fire Water • Irrigation • Industrial Water • Wastewater Networks
Gate valves are generally intended for isolation rather than continuous throttling.
Globe & Control Valves
Globe and control valves are used where the system requires more precise regulation rather than simple on/off isolation.
They can be used to manage:
Flow • Pressure • Process Conditions • Water Distribution • Industrial Services
Globe control valves use linear valve movement to regulate process flow.
Valve Types Available
TARIS can support requirements for:
NRV / Check Valves, Swing Check Valves, Wafer Check Valves, Dual Plate Check Valves, Ball Check Valves, Silent Check Valves, Foot Valves, Gate Valves, Butterfly Valves, Ball Valves, Globe Valves, Control Valves, Air Release Valves, Pressure Relief Valves, Knife Gate Valves, Isolation Valves.
Availability depends on required specification, size, material and pressure rating.
Compact Isolation for Larger Pipelines
Butterfly Valves
Butterfly valves provide a compact and practical solution for isolation and, with suitable designs, flow regulation.
They are commonly used in:
Water Treatment • Pump Stations • Building Services • Industrial Water • Cooling Water • Wastewater • Large Diameter Pipelines
Butterfly valves are available in multiple designs for both isolation and throttling services.
Quick Shut-Off for Water & Utility Lines
Ball Valves
Ball valves provide quarter-turn operation and are widely used where quick and reliable shut-off is required.
Suitable applications can include:
Water Lines • Pump Accessories • Compressed Air • Industrial Utilities • Building Services • Process Lines
Depending on the application, ball valves are available in different bore, seat and material configurations.
Ready Stock Available
Pumps
Spare Parts
Hoses
Fittings & Couplings
Accessories
Valves FAQ
Common pump-system valves include check valves, gate valves, butterfly valves, ball valves, foot valves, control valves and air valves.
In many pumping systems, an NRV is installed on the discharge side of the pump. Exact installation should follow the pump and valve manufacturer's recommendations.
Where required for suction-lift operation, a suitable foot valve or non-return valve may be installed to help retain prime.
The correct valve depends on the wastewater condition. Ball check, swing check, knife gate, butterfly and gate valves are among the options used in wastewater systems.
TARIS supports industrial valves, NRVs and pump accessories for water, dewatering, wastewater and general piping applications.
TARIS supports valve enquiries across the UAE, Oman and Bahrain.