Key Features
Designed Around Real Site Requirements
Taris TS 150 combines practical operation, strong pumping capability and flexible configuration for demanding dewatering applications.
Performance at a Glance
High-Performance
6 Inch Pump
1200 m³/h
Maximum Flow
8m
Max Suction Lift
40 m
Maximum Head
70 CFM
Vacuum
Technical Data
Pump Details
Model
TS 300
Pump Type
Automatic Self-Priming Centrifugal Dewatering Pump
Suction × Discharge
12” × 12” (300 mm × 300 mm)
Vacuum Capacity
70 CFM
Maximum Water Flow
1200 m³/hr
Maximum Head
40 m
Maximum Suction Lift
8 m
Impeller Options
Closed
Engine Details
Engine
Kirloskar HA 6R1080TA
Configuration
6-Cylinder, Water-Cooled Diesel
Rated Capacity
156 HP
Operating Speed
1500 RPM
Starting
Electric Start
Fuel Capacity
Approx. 320 L / 24-Hour Configuration
Material Details
Volute Casing
Cast Iron / SS304 Optional
Pump Shaft
SS316
Impeller
SS316 / Bronze Optional
Stuffing Box
SS316
Mechanical Seal
Double Mechanical Seal
Priming Tank
Mild Steel
Mounting Options
Four Wheel / Skid
Ready Stock Available
Pumps
Spare Parts
Hoses
Fittings & Couplings
Accessories
Pump FAQ
The decision should be based on the required flow, total head, groundwater inflow, discharge distance and operating conditions rather than pipe size alone. Share your project data with TARIS so the pump requirement can be reviewed properly.
In some applications, a correctly selected larger pump may reduce the number of smaller units required. However, this depends on the site layout, required duty point, backup requirements and water conditions.
Provide the expected water quantity, required head, suction depth, discharge distance, water condition, solids content, operating hours and project location.
A properly selected high-capacity 12 inch pump can be suitable for major temporary water-removal applications. Final suitability depends on required flow, solids content, head and site access.
It can support suitable mining and quarry water-management applications when the pump specification matches the required flow, head and water conditions.
Long discharge lines create friction losses. Pipe or hose diameter, length, elevation changes, fittings and required flow all affect the pump duty, so these details should be reviewed during pump selection.
Yes. TARIS can support suitable pump and engine spare-part requirements based on model, part reference and availability.
