- Flange Fittings
- Couplings
- Bauer & Miller Type Couplings
- Reducers
- Strainers
Flanged connections are widely used where a secure bolted joint is required between pumps, pipes, valves and other system components.
TARIS can support flange-related requirements for dewatering and water-transfer systems in different sizes and configurations.
For replacement requirements, customers can provide the existing flange size, bolt-hole arrangement, pipe diameter or reference image to help identify the correct connection.
Temporary pumping systems often need to be assembled, extended or relocated during the project.
Quick-connect couplings help reduce installation time by allowing hose and pipe sections to be connected and disconnected more efficiently than conventional fixed joints.
They are particularly useful for construction dewatering, temporary bypass pumping, drainage and mobile pump installations.
TARIS supplies coupling options including Bauer type and Miller type connections for suitable dewatering and water-transfer applications.
These connection systems are commonly selected where project teams require durable, reusable fittings that can be connected and removed during temporary site operations.
Customers can send the coupling type, diameter and application details for matching product support.
A project may require a larger pump to connect to a smaller hose or an existing pipeline with a different diameter.
Reducers and adaptors allow the system to transition between sizes such as 6 inch to 4 inch, or other required combinations.
Correct selection is important because changes in pipe diameter can influence water velocity, friction loss and overall pumping performance.
A complete dewatering system also needs supporting accessories.
Strainers help protect the suction side of the pump by reducing the entry of unsuitable debris.
End caps can close unused branches or pipeline ends.
Mushroom-type fittings, connectors and adaptors can support specific system layouts and termination requirements.
TARIS can assist customers in combining these accessories with pumps, hoses, header pipes and other dewatering equipment.
Multiple Connection Types. One Supply Partner.
Our dewatering fitting range is selected around common construction and pumping requirements.
Flange Fittings
Pump, pipeline and hose connections
Quick-Connect Couplings
Fast temporary installation and dismantling
Bauer Type Couplings
Dewatering, construction and water-transfer lines
Miller Type Couplings
Pump and hose connection requirements
Reducers
Connecting different pipe or hose diameters
Strainers
Suction-side protection
Mushroom Fittings
Suitable system termination / connection requirements
End Caps
Closing unused line ends and outlets
Adaptors & Connectors
Transition between different connection systems
Connections for Small Pumps to Large Dewatering Systems
TARIS supports fitting and coupling requirements across a wide range of pumping sizes, including: 2 Inch • 3 Inch • 4 Inch • 6 Inch • 8 Inch • 10 Inch • 12 Inch • 14 Inch This allows customers to source connection accessories for compact pumps, standard construction dewatering units and larger high-volume pumping systems through one supplier. Instead of selecting fittings only by nominal size, customers should also confirm the connection type, flange pattern, hose type and operating requirement before ordering.
Why Choose TARIS?
TARIS understands that fittings are not simply accessories. The wrong connection type or size can delay installation and create unnecessary site problems. Our team works from the customer’s pump size, hose size, connection type and application to help identify suitable fitting options. Customers can also send a product image or existing fitting sample details when the exact technical name is unknown.
From Pump Outlet to Discharge Line
Complete Connection Solutions for Dewatering Systems
A dewatering system depends on more than the pump itself. Hoses, header pipes, discharge lines and accessories must be connected securely so the system can operate efficiently and be assembled or relocated quickly on site.
Ready Stock Available
Pumps
Spare Parts
Hoses
Fittings & Couplings
Accessories
Fittings FAQ
A reducer can physically connect different diameters, but the final arrangement should consider required flow, discharge distance and friction losses. Share the pump duty and line configuration before selecting the reducer.
Quick-connect systems such as suitable Bauer or Miller type couplings can make temporary installation and dismantling easier. The best option depends on the existing hose or pipe connection used on the project.
A suitable strainer helps reduce the entry of larger debris into the suction line and pump. The strainer size and open area should be appropriate for the pump and application.
Yes. TARIS can support complete requirements combining pumps, suction and discharge hoses, couplings, flanges, reducers, strainers and related dewatering accessories.
Yes. TARIS supports enquiries across Oman, including Sohar, Salalah, Duqm, Nizwa, Seeb, Sur, Barka, Rustaq and Ibri, as well as Bahrain and the UAE.
